Applicator and HOT MELTING system modules

In hot glue systems, the applicator, module and nozzle work as a coherent unit, and the design of each is definitely dependent on the other. With the production of various types of applicators and modules compatible with nozzles, the JSM collection is responsible for all common applications of the hot glue system, and due to the indigenous knowledge of design and manufacturing, it also has the ability to produce in various industries.

Features of applicators:

Compatible with all JSM production modules
Design and manufacture in unlimited sizes and lengths
It has an all-steel adhesive strainer with a compact design
Hot air system for stable spraying pattern and reducing power consumption
Smart temperature control with super sensitive sensor
Quick replacement of sensor, filter and element
Light and strong hard anodized body made of aluminum and cast iron alloys
High lifespan due to replaceable and spare parts
Working temperature 70-191 CO
Hydraulic working pressure 13.8-55 bar
The maximum fluid flow rate is 110 gr/min per module at a viscosity of 10,000 cps.
Wind pressure 4.1 bar
Wind flow 1 scfm @ 191 Co per 25 mm width
1.5 scfm @ 177 Co

Feature of UM25 and UM22 module:

Compatible with all JSM applicators
Compatible with spiral, signature, algro, alternating current and direct contact (tangential) nozzles.
Cover width 25mm for UM25 and 22mm for UM22
Working temperature 70-205 Co
Maximum fluid flow rate 110 gr/min at 10000 cps viscosity
14 gr/m2 for line speed 300m/min

Wind pressure 4.1 bar (use air without oil)
Maximum intermittent spraying cycle up to 1500 cycle/min
(It varies depending on air pressure and fluid viscosity)

The minimum time of stopping and connecting spraying is 40 milliseconds
Long service life due to the use of replaceable kits
Easy service and maintenance
Quick nozzle change mechanism
Hard anodized body made of imported aluminum alloy
Sealing the needle in two parts for reliability and longer life
Use of Shim Kit Steel with very accurate manufacturing tolerance
Precision-tolerance hardened needle and seat made of alloy steel

Features of the UM50 module:

Suitable for wide rolls with reduced maintenance cost
Suitable for continuous high-speed and intermittent low-speed lamination
Compatible with all JSM applicators
Roll width coverage of 50mm per hermodule
Working temperature 70-205 Co
Maximum fluid flow rate 110 gr/min at 10000 cps viscosity
14 gr/m2 for a line speed of 300 m/min

Air pressure 4.1 bar (air without oil should be used)
Maximum intermittent spraying cycle up to 1000 cycle/min
(It varies depending on air pressure and fluid viscosity)

The minimum time of stopping and connecting spraying is 60 milliseconds
Long service life due to the use of replaceable kits
Easy service and maintenance
Quick nozzle change mechanism
Hard anodized solid body made of imported aluminum alloy
Sealing the needle in two parts for reliability and longer life
The use of a steel shim kit with a very accurate manufacturing tolerance
Precision-tolerance hardened needle and seat made of alloy steel